低压管道环状管网水力计算

本文对环状管网运行中仅开启一个出水口的水力计算方法进行了探讨。计算出了特征长度系数、平均特征长度系数和最大特征长度系数,并将其排成数表供直接查用。同时计算出了双环管网平均和最大特征长度系数的回归方程,经比较,本文提出的计算方法简单、可靠,便于设计中应用。     

低压射流不同喷嘴参数及压力下破碎过程实验

研究了不同低压下喷头喷嘴直径和喷嘴锥角对射流破碎的影响。采用高速摄像仪对低压圆柱射流的射流核心长度和射流破碎长度进行实验,测量了不同喷嘴结构的流量、射程和末端水滴直径。结果表明:同一压力下,当喷嘴锥角不变时,随着喷嘴直径的增大,喷头流量、射程和喷头末端水滴直径都变大,射流核心长度和破碎长度均增大;当喷嘴直径不变时,随着喷嘴锥角的增大,喷头流量逐渐减小,而喷头射程呈先增大后减小趋势,喷头末端水滴直径也变大,射流核心长度逐渐减小,射流破碎长度先减小后增大。综合考虑射程和雾化效果,直径为5 mm、锥角为45°的喷嘴为最优选择。同时通过对不同Re数和We数的实验和分析,给出了适合低压喷嘴的两种射流特征长度的拟合关联式。     

基于双向渐进结构优化法的装载机动臂拓扑优化

利用双向渐进结构优化法研究了装载机动臂结构的拓扑优化问题。利用有限元软件ANSYS的APDL语言进行二次开发,实现了多工况下基于应力水平的双向渐进结构优化法(BESO)。对装载机工作装置的动臂进行多工况下的结构双向渐进拓扑优化,得到了动臂的最佳拓扑结构。结果表明了该方法的实用性和有效性,且比ESO方法具有更高的效率。     

基于点云数据的NURBS曲面重建研究

提出一种基于点云数据的NURBS曲面重建方法，针对数据点的分布不均匀性，进行非均匀B样条曲线控制点的反算，通过累积弦长法构造非均匀节点矢量，保证了曲面的插值精度和曲面重建的质量。     

Comparison of aluminium tolerance in the brassicas and related species

The aluminium tolerance of 31 varieties within 11 species in six genera of the Cruciferae was determined by measuring root length under aluminium stress. Variance analysis indicated highly significant differences of aluminium tolerance among the species compared. Raphanus sativus (2n= 18, RR) had the highest aluminium tolerance, followed by Brassica carinata (2n= 34, BBCC), Brassica oleracea (2n= 18°C) and Brassica napus (2n= 38, AACC), which had the C genome. There might be more than one gene for aluminium tolerance in the R and C genomes. Those species such as Brassica campestris (2n= 20, AA), Brassica nigra (2n= 16, BB), Brassica juncea (2n= 36, AABB), Arabidopsis thaliana (2n= 10, arar), Sinapis alba (2n= 24, alal), Cheiranthus cheiri (2n= 12, chch) and Orychophragmus violaceus (2n= 24, OO) that did not include the R or C genome had lower aluminium tolerances. Transfer of aluminium tolerance from R. sativus into the cultivated brassicas seems possible by intergeneric hybridization and the production of addition, substitution or translocation lines.     

The theoretical proportion of the donor genome in near-isogenic lines of self-fertilizers bred by backcrossing

Summary The length was estimated of the chromosome segment with the desired marker gene introgressed from a donor by backcrossing into a recurrent parent. It was found that, for instance, for a chromosome with a length of 100 cM the length of the segment is 32 cM in BC6.These estimates were compared with those made by Hanson (1959). Two corrections proved to be necessary.The implications for breeders and researchers are discussed. Differences between two near-isogenic lines often ascribed to the difference in genotype at the marker locus, may also be caused by genes linked to the marker gene and dragged into the backcross product.     

Experimental Study on the Beam Bars Detail in Exterior Short Pier Shear Wall Joints

By experiment of the beam bars in exterior short pier shear wall joints,the anchorage performance of the beam bars in joints on the action of low cyclic load have been studied to attest if the beam bars in exterior short pier shear wall joints can sufficed with the demanding of anchorage intensity and anchorage rigidity, when the anchorage of beam bars satisfy the requirement of the code.     

矮化中间砧苹果施氮位置对细根分布、氮素吸收和产量品质的影响

为明确矮化中间砧苹果树合理的施肥位置,减少氮肥的浪费。试验于2018年和2019年,以‘烟富3’苹果/SH6/八棱海棠为试材,借助15N同位素示踪技术,研究了萌芽前在树冠投影范围距树干由近及远的3个水平距离——内环、中环和外环施氮对新梢旺长期细根和土壤15N分布、树体15N吸收以及果实产量和品质的影响。结果表明:各处理的苹果细根(直径≤2 mm)根长密度均在水平方向和垂直方向呈衰减规律,主要分布在距离树干水平方向0~100 cm、垂直方向0~40 cm土层范围;与不施肥(对照)相比,施氮增加了细根根长密度,以施氮区内细根根长密度增加最为显著;从垂直方向0~20 cm土层施氮区细根根长密度增加量来看,内环施氮处理增幅最大,为对照的1.33倍~1.36倍,其次是中环施氮处理。各处理土壤15N含量峰值在水平方向均出现在施氮区域,在垂直方向均出现在0~20 cm土层。不同处理间树体细根根长密度与土壤15N分布空间吻合度(RLD-15N)差异显著,内环施氮处理显著高于中环和外环施氮处理。内环施氮显著提高了新梢旺长期树体新生器官氮素累积量,树体15N利用率表现为内环施氮>中环施氮>外环施氮;内环施氮和外环施氮土壤15N残留率无显著差异,但均高于外环施氮。与外环施氮处理相比,内环施氮处理显著提高了果实产量、可溶性糖含量和糖酸比,而硬度和可滴定酸含量无显著差异。可见,矮化中间砧苹果内环施氮有利于提高细根根长密度与土壤氮的空间分布吻合度,增加了生长前期新生器官含氮量,提高了树体15N利用效率,提高了果实产量和可溶性糖含量。因此实际生产中成年矮化中间砧苹果树推荐在靠近树干位置的1/3树冠投影面积处,即约为距树干水平距离0~75 cm范围内施氮肥。     

CALCULATING SYSTEM FOR SECOND-ORDER EFFECT IN THE COLUMNS OF REINFORCED CONCRETE FRAMES

This paper makes an analysis and comparison of the calculatingsystem for second-order effect in columns of reinforced concrete frames proposedby scholars at home and abroad,and the systems adopted by codes of manycountries.The focus is on explaining the conceptual error and deficiency in somemethods.After expounding the basic law of the second-order effect in framecolumns with different restraints,this paper suggests an improvement of thecalculating system for second-order effect in frame columns for China's DesignCode of Concrete Structures.     

Using of AFLP Marker to Predict the Hybrid Yield and Yield Heterosis in Rice

利用AFLP分子标记对46个水稻品种进行遗传多样性分析,继而研究分子标记遗传距离与按照NC设计获得的195个杂交组合的产量及特殊配合力的相关性,探讨预测杂种优势的可能性。结果表明:(1)通过UPGMA聚类分析(图3),可将供试材料分为16个类群,并把来源不明的品种(系)划分到相应类群中,从而对这些材料进行初步鉴定。可见,AFLP分子标记是检测类内品种间遗传差异的有效方法,为水稻品种(系)亲本选配提供理论依据。(2)分子标记遗传距离与杂种产量优势、F1产量、特殊配合力之间都呈显著正相关,相关系数介于0.3235-0.7713之间。但相关程度还不足以预测杂种优势。增效座位和减效座位以及使用与杂种优势有关的QTL连锁标记位点可能提高杂种优势的预测能力,但最终解决,将依赖于杂种优势遗传机理的研究。